Video links:

  • How to fold a hemp flat origami style and some night folding tips.
  • How to achieve a snug and trim fit with a hemp flat.
  • How to Jo fold a hemp flat.
  • How to put on a plain and winged hemp prefold.
  • How to fold the inserts in a snapless hemp fitted for nights.
  • How to adjust the size of a newborn hemp fitted.

Care instructions :

Hemp is a sensitive fabric and care does need to be taken when washing and drying. The more care you take, the longer your nappies will retain their shape and last.

 

1. Storing dirty nappies:


Get yourself a nappy bucket. I got mine at baby city. One with holes works well. Even a laundry basket.

Simply throw the dirty nappies in. I wash every 2 days or so.

I dunk and flush poo nappies in the loo  off before they go.

Remember to give night nappies a good rinse in hot tap water before throwing in the bucket.

Does the bucket smell? No, it shouldn`t. You can add some drops of lavender or tea tree to a tissue or cloth wipe and toss that in if you like. If you have a strong ammonia smell you need to re look at your washing routine. See below for some help.

Please do not leave dirty nappies in a bucket for longer then 3-4 days. Mould can become an issue.

 


2. Washing hemp nappies:

  • Pokkelokkie`s hemp nappies are partially prepped meaning they do NOT need to be pre washed and can go OTB (on the bum) immediately. Please do not boil hemp in an attempt to prep. 
  • Hemp reaches maximum absorbency after 8 - 10 washes so just start using the nappies.
  • Check HERE for the correct amount of detergent.
  • Use the cotton cycle. Main wash.
  • No fabric softer, as it renders the hemp less absorbent.
  • Please cold wash your hemp nappies. Max 30`C. 
  • PLEASE RINSE ALL NAPPIES BEFORE WASHING OR ADD A PRE RINSE CYCLE TO YOUR WASHING MACHINE. If you do not do this you will be washing you nappies in pee water and you will end up with stink issues.
  • Throw in a few towels with a emptier load. Nappies need agitation to get clean. Do not fill the machine completely. Aim for 3/4 full.
  • New hemp coloured nappies might  run if you wash on hot.
  • Do not mix your white or light coloured nappies with NEW hemp nappies when washing.Treat them like white clothes. Wash separately initially for a few washes with some towels just in case.
  • Flats do not always remain a perfect square. But they should not change shape to the extent that you cannot use them.

3. Drying flats: 

  • Please fold OVER the line and do not hang by the corners as this will cause it to stretch.
  • Do not "shake out" the flat (to uncurl the edges) when wet before folding over the line.This will stretch it.Gently uncurl the edges as you fold it over the line
  • Shake the flat out once it is dry to uncurl edges.

4. Tip to soften hemp:

  • If your hemp nappies become a bit stiff, pop them (already dry) in the tumble drier on warm  for 10 minutes.
  • Add one cup of vinegar to a normal wash in the sta soft drawer now and then as a softner. Don`t over do this.

5. Fleece covers

  • Rotate 3 - 4 covers a day and air the one on the window between changes. Pop the cover in the wash when it starts to smell a bit. You can wash your covers with your clothes too.
  • When unsnapping the buttons please hold the snap at the base with your thumb and gently unsnap. Each nappy is hand pressed and taking care in this way will ensure no snaps are removed by force. 

6. PUL covers

PUL is sensitive to hot temperatures.Please cold wash.

You can wipe them down between changes and after a day of use I hand wash mine with some sunlight in the basin and hang on the line.


7. Stinky nappies?

If you start to smell a strong ammonia smell the minute baby wees in the clean nappy then you may have ammonia build up. This can be caused by an incorrect washing routine.

Troubleshooting:

1. Check you are using the correct amount of detergent here

2. Is your machine load full enough? Is it too full? Aim for 3/4 full.

3.Are you rinsing your nappies before they are washed? This is KEY!

4. Are the nappies preloved? Were they stripped? If not they need a strip.See below.

Please e mail me if you are stuck.

Stripping nappies

You may need to strip if your nappies become smelly. 

1. Wash your nappies. You must only strip clean nappies.

2. Dissolve half a cup of bleach (Jik works well) to 1 litre water in a jug. Fill the bath with cold tap water enough to cover the nappies. Add the bleach and mix. If only stripping a few nappies then do this in a small bucket and use 1 - 2 tBlsp bleach only.

4. Put your nappies in the bath and mix well. Soak for 30 mins.

5. Wash in the machine at 30 degrees. 


8. Wool covers

Your wool cover has been lanolised 2 times meaning it can have a slightly oily feel but is waterproof.This will reduce with time. Just use it.

Wool covers are designed to work as a team with a hemp flat, prefold or hemp fitted nappy underneath. What you use underneath your wool cover is the foundation for the successful use of your wool cover. 

If your cover seems to be wet and leaks:

Wool is not 100% waterproof like plastic it is a natural fibre and absorbs 30% of moisture that comes in contact with it and it slowly evaporates. If your cover leaks, it is possible that you are not using an absorbent enough nappy. BOOST. Add a hemp booster or a padfolded flat to the nappy. If a wool cover that you have been using successfully begins to leak, that could indicate that it is time to re-lanolize your wool.  

The covers do not need to be washed after every use.  Just allow the cover to air dry in between uses.  If you notice the cover is not as leak proof as before, it is time to lanolize. I find you need to lanolize about once a month.

How to lanolize :

Ingredients needed : Lanolin and baby soap or wool wash.

1. Mix 10g lanolin (per cover) with 50ml hot water so it dissolves in a small bowl. I use a fork to mix it. Add a squirt of wool wash and mix. It should now be a milky suspension.

2. In the sink or a large plastic mixing bowl... add enough luke warm water to cover the wool soaker.

3. Add your lanolin mixture and mix.

4. Turn your wool cover inside out. Add the cover to the bowl of water and lanolin and swish it around gently. Gently press the wool fibres to ensure the mixture soaks through.Soak for 30 minutes.

5. Double over a towel on table. Take out the cover and gently press the water out with your fingers. BE GENTLE. Lay the cover on the towel and place another towel over it. Gently press to get some more water out.

6. Leave the cover to dry  (lying flat on the towel ) outside in the shade (not in direct sunlight) for a few days. Do not hang!